lead-free parts pb ligitek electronics co.,ltd. property of ligitek only data sheet LUY9653R-50A doc. no : qw0905-LUY9653R-50A rev. : b date : 22 - may. - 2006 square with 4leads type led lamps
ligitek electronics co.,ltd. property of ligitek only page 1/5 anode 7.62 0.5 package dimensions part no. LUY9653R-50A 0.8 1.55 cathode 5.0 2.55 5.08 0.3 0.4 2.5 5.08 0.3 7.62 0.5 7.35 30 60 75%100% 25%50% -30 directivity radiation 0 25% 75% 50% 100% -60 0 note : 1.all dimension are in millimeter tolerance is 0.25mm unless otherwise noted. 2.specifications are subject to change without notice. 3.5 0.5 4.8
* static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. unit page 2/5 ma ma mw a v ratings uy(r) symbol parameter part no. LUY9653R-50A absolute maximum ratings at ta=25 50 90 120 10 i f i fp pd ir -40 ~ +100 -40 ~ +85 tstg t opr esd2000 forward current peak forward current duty 1/10@10khz reverse current @5v power dissipation storage temperature operating temperature electrostatic discharge( * ) ligitek electronics co.,ltd. property of ligitek only 90 viewing angle 2 1/2 (deg) typ. min. min.max. 2.6 1.7550850 color lens water clear 59020 spectral halfwidth nm dominant wave length dnm luminous intensity @20ma(mcd) forward voltage @20ma(v) material algainp yellow part no LUY9653R-50A typical electrical & optical characteristics (ta=25 ) emitted note : 1.the forward voltage data did not including 0.1v testing tolerance. 2. the luminous intensity data did not including 15% testing tolerance.
fig.3 forward voltage vs. temperature fig.5 relative intensity vs. wavelength ambient temperature( ) r e l a t i v e i n t e n s i t y @ 2 0 m a wavelength (nm) f o r w a r d v o l t a g e @ 2 0 m a n o r m a l i z e @ 2 5 fig.4 luminous intensity vs. temperature ambient temperature( ) l u m i n o u s i n t e n s i t y @ 2 0 m a n o r m a l i z e @ 2 5 typical electro-optical characteristics curve forward voltage(v) fig.1 forward current vs. forward voltage f o r w a r d c u r r e n t ( m a ) forward current(ma) l u m i n o u s i n t e n s i t y n o r m a l i z e @ 2 0 m a ligitek electronics co.,ltd. property of ligitek only 0 0 50 100 150 050100150 0.0 1.0 2.0 3.0 -40-200204060 0.51.01.52.0 80100 0.94 -20 -4040 20 080100 60 0.0 0.5 1.5 1.0 uyr chip page 3/5 fig.2 luminous intensity vs. forward current 5.0 4.0 2.53.0 0.96 0.98 1.00 1.02 1.04 1.06 500 0.0 0.5 550 600 650 1.0 part no. LUY9653R-50A
dip soldering preheat: 120 c max preheat time: 60seconds max ramp-up 2 c/sec(max) ramp-down:-5 c/sec(max) solder bath:260 c max dipping time:3 seconds max distance:2mm min(from solder joint to body) 2.wave soldering profile soldering condition(pb-free) 1.iron: soldering iron:30w max temperature 350 c max soldering time:3 seconds max(one time) distance:2mm min(from solder joint to body) ligitek electronics co.,ltd. property of ligitek only page 4/5 0 preheat 0 25 2 /sec max 100 50 150 time(sec) temp( c) 120 260 5 /sec max 260 c3sec max part no. LUY9653R-50A
reference standard description page 5/5 mil-std-750: 1026 mil-std-883: 1005 jis c 7021: b-1 jis c 7021: b-12 mil-std-883:1008 jis c 7021: b-10 mil-std-202:103b jis c 7021: b-11 mil-std-202: 107d mil-std-750: 1051 mil-std-883: 1011 test condition test item reliability test: 1.ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs) 1.ta=105 5 2.t=1000 hrs (-24hrs, +72hrs) operating life test low temperature storage test high temperature storage test 1.ta=65 5 2.rh=90%~95% 3.t=240hrs 2hrs 1.ta=105 5 &-40 5 (10min) (10min) 2.total 10 cycles high temperature high humidity test thermal shock test 1.under room temperature 2.if=20ma 3.t=1000 hrs (-24hrs, +72hrs) the purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. the purpose of this is the resistance of the device which is laid under condition of high temperature for hours. the purpose of this is the resistance of the device which is laid under condition of low temperature for hours. the purpose of this test is the resistance of the device under tropical for hours. this test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed. ligitek electronics co.,ltd. property of ligitek only mil-std-202: 208d mil-std-750: 2026 mil-std-883: 2003 jis c 7021: a-2 1.t.sol=230 5 2.dwell time=5 1sec solderability test this test intended to see soldering well performed or not. solder resistance test this test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. 1.t.sol=260 5 2.dwell time= 10 1sec. mil-std-202: 210a mil-std-750: 2031 jis c 7021: a-1 part no. LUY9653R-50A
|
